Re: PTC Mathcad Prime 3.0 now available
This is correct. EXCEL is not very user freindly for what we do, but it was what we had 20+ yrs ago. I think I started using Mathcad v4 around 1988 at a different company, and we converted (from...
View ArticleRe: Simultaneous equations not solving MathCad 15
Thank you, Werner. That did the trick on this step. Unfortunately, I am sure that I may run into some additional issues as I move forward with this. I expect to get to around 60 simultaneous equations...
View ArticleClik here to view.
Re: What happened to the forum listing?
Those are still in my overview...not sure what's going on
View ArticleRe: What happened to the forum listing?
Yea, they restored after a while. Just curious how this happens in the forum.
View ArticleCreo Parameters and Drawing Text Formatting
Hi all,I am hoping someone can point me to a good resource.I am working with a drawing that contains various text entities to include text in the drawing format, text in notes, and text in other...
View ArticleRe: could someone explain the use of both side option in surface trim?
I'd say this is a pretty unique case where "both sides" doesn't make sense. Typically, a surface trim operation, whether revolved, extruded, by another surface or plane or by a curve on the surface,...
View ArticleRe: Replacing file reference of External Merge
I would like to be able to do what Tom is wanting to do. I can't really relate this by a Family Table (suggested above) as the differences are quite substantial. From what I'm reading online you...
View ArticleRe: Solving Kramers- Kronig from absorbance: Difficulty in interp function
Don't use vectors in the definition of Delta_n.Setup that function so that it works for single values of the argument. Later you can vectorize the call.What do you intend with the vector at the...
View ArticleRe: Running Mathcad 11 in Windows 7
Nobody seems to mention the fact that it is ESSENTIAL to disable all anti-virus software before tryint to install Mathcad. I struggled with Windows7, Linux (under Wine - does anyone have any...
View ArticleRe: Dimensions Won't Display
Thank you Antonius. It was associated with the Cut Off Plane. Thanks again. This lead me to what I need. Doug
View ArticleRe: PTC_WM_CREATED_BY and PTC_WM_MODIFIED_BY in WC 10.2
Thanks a lot for this feedback, Celia. Changing the behavior of such relevant code should be discussed and handled with care because it leads to big impacts. Customers started with Pro/INTRALINK used...
View ArticleRe: Solving Kramers- Kronig from absorbance: Difficulty in interp function
Thank you Mr. Exinger for your reply.For the calculation of delta n, I want to specify that , for each omega, they pick up corresponding omega one, and corresponding alpha for the whole dataset. Then I...
View ArticleRe: formats falling off drawing
When a format is brought in, any plain notes become dumb, uneditable text but any tables are converted to native drawing tables. It's not surprising that the tables would remain.
View ArticleRe: Assembly Backup replaces modified components in WIP - Creo
There is another wrinkle that caused us some confusion a while back. If you use the new failure resolve mode and use the "retrieve missing component" command, then Creo will remember the missing...
View ArticleRe: formats falling off drawing
It hardly need be said at this point that the whole way this is done in ProE is ridiculous, it's like Autocad 12 or something. There must be a better way to show a format on a drawing.
View ArticleRe: formats falling off drawing
There is a setting, somewhere, that turns the format on and off. I searched for it in WF4, but couldn't find it. Check to see that the format isn't simply turned off. Also, look for drawing layers....
View ArticleRe: Publishing w/Remote Site & WAN Utilization (long)
PTC's recommendation (after much discussion) was to place an additional publisher at the remote site. There are some settings you can add that will allow data checked in at a remote site to be...
View ArticleRe: External simplified Rep
I looked at this a while ago**. At the time the problem was that it only worked outside of a PDM system. It certainly is attractive based on the description, but PTC Tech Support could never find a...
View ArticleRe: Mathcad Prime 3.1
The may have given up on the idea of bringing Prime at least at the level of MathcadNo, I believe they do intend to do that, if only because it's the only way to get everyone to shut up about it. It...
View Article