Re: Measures not Available in Dynamic Frequency Analysis Results Window...
Okay, for example, when defining a base excitation amplitude, there seem to be three places to do this The direction vector, which I assume is intended to be a unit vector, but does this scale the...
View ArticleRe: More than one command at a time?
Thank you so much both of you. I didn't have the semi-colons in the file, but wrote them now and got it to work by using the source command. Thanks!
View ArticleRe: Add business reporting
I copied both registries to my 10.2 system. When I ran the 10.2 M020 PSI, both instances were selectable for update. So, it doesn't seem to be a problem with the registry files. It could be that the...
View ArticleRe: Creating Assy Dwgs - Is there a way to pre-set the Simplified Rep?
What if you made a drawing of an External Simplified Rep assembly instead?
View ArticleRe: Cannot Remove part
I've found it usefull to read the trail file output and also outdated.lst and missref.lst files created in the start directory on an open.
View ArticleRe: Creating Assy Dwgs - Is there a way to pre-set the Simplified Rep?
Interesting idea - my concern would be that you'd need to propogate versions of the assembly to accomplish this. I'll have to think thru the implications of this method. Anyone out there have...
View ArticleRe: Increase Creo performance - long load times
It's not just performing HLR, it is creating records representing all the real and silhouette edges, both completely visible and partially occluded. Identifying the edges could be done on separate...
View ArticleClik here to view.
Re: Opening All Files of one type (extension)
Richard Jackson wrote: You would guess right . There's a component that can create a list all files in a folder with a given filename pattern (for example of one type).Here is another link. Not sure if...
View ArticleRe: Opening All Files of one type (extension)
Everything except the common dialog from Mathsoft. It had some problems, which I fixed. The fixed version is in the collection.
View ArticleRe: Need help with drawings in Creo 2
Assuming that you are not using Windchill or another PDM, an easier approach would have been to open the drawing and any assemblies that contain that assy and use the rename command in Creo. Then all...
View ArticleRe: Creo View printing black page
I have users with new computers. Printing worked fine on thier old computers- printing no longer works on the new hardware.On the desktop hp printers the document is a quick blip and does not spool. On...
View ArticleRe: Snap fit hook optimization
Hi Gyorgy, Thanks for your interest in this new capability in Creo 3.0. Sadly the model I used is a customer model and I cannot share it. However, I am currently creating a new sample model which I...
View ArticleRe: Failed to launch Cognos Reports
That looks like the error displayed when wt.reporting.thirdParty.enabled is set to false. After installing the Business Reporting module, did you follow the post install actions in the install...
View ArticleCreo Parametric 3.0 - Assembly Explode Lines
Does Creo Parametric 3.0 have the capability to make dash exploded lines, including offset exploded lines in assembly mode?
View ArticleRe: Hole Tolerance & Decimals on Drawing
This is a tough one, Tyler. You can access the dimension tolerances on an individual basis but formatting them into the hole note may be more challenging. I fully appreciate your need to do this....
View ArticleRe: Creating Assy Dwgs - Is there a way to pre-set the Simplified Rep?
In the recent discussions of External Simplified Reps (ESR), I am not drawing a close relation between simplified reps and ESR's. It is an unfortunate naming convention. In a drawing, an ESR is...
View ArticleRe: Hole Tolerance & Decimals on Drawing
Perhaps these will help: Tolerances—Parameters associated with tolerance formats. These symbols appear when dimensions are switched from numeric to symbolic. tpm#—Tolerance in plus-minus symmetrical...
View ArticleRe: is it a bug?
What other extension would you buy? What function do you think is missing? If you need an estimate of the weight, use the weight of the flat pattern. If weight is important, weigh each part when it is...
View ArticleRe: is it a bug?
You could take the mass data from the flat state. The flat pattern feature has the option to flatten all forms. Actually, this would make for a nice improvement where one could switch the mass...
View ArticleRe: Need help with drawings in Creo 2
So here's a question... how do templates deal with predefined views when the model changes on creating a new drawing?
View Article