Re: total_sheets
Again, I think the answer is no. Without drawing relations, there's no way to control this. You also cannot access the total sheets external to the drawing. In a situation where you have two...
View ArticleRe: total_sheets
David, I don't know if you have access to ptc.com/support - but if yes, please look at Case Details - 11764712. I work in VAR company, and unfortunatelly I was asked by customer to find sollution for...
View ArticleClik here to view.
Re: Selection Tricks/Workarounds?
For isolating components, you can: 1 - Select Components (Graphic area, tree, find tool, etc.)2 - RMB->Set Representation To->Master. It only works if the simplified rep is unchanged, but is...
View ArticleClik here to view.
Re: How to properly use constraints and rules followed by Mathcad's Solver
adam miller wrote: With that being said is there any way to get the solver to display multiple possible solutions if not all that it can find in a particular range? Thanks, Adam There are an infinite...
View ArticleClik here to view.
Re: Rnd in Mathcad
What's wrong with this assessment of the rnd function:The results come pretty close to what they should be. Luc
View ArticleRe: total_sheets
You reminded me, that some time ago I created drawing that behaved depending on the part on drw. For sure it was done for family table instances (flat state is also an instance). I'm not sure if i used...
View ArticleRe: How to properly use constraints and rules followed by Mathcad's Solver
Here, for example, several results are determined for a range of values of t and H. (Also, because there are sometimes multiple solutions for single values of t and H (as in the image in my previous...
View ArticleWindchill not allowing a first Creo CAD file to be uploaded
I am a mentor for team FRC 3173 - IgKnighters. We very much want to use Winchill to share Creo CAD files. I am having troubles loading a first CREO CAD file into Windchill for others to access. I am...
View ArticleClik here to view.
where are my favorites in Windchill 10?
Hello. I have searched in help within Windchill 10 and online but cannot seem to find where my Favorites end up when I follow the fairly simple process as depicted below: or in ptc's support site:...
View ArticleClik here to view.
Re: Windchill not allowing a first Creo CAD file to be uploaded
Hi Peter,It looks like you're almost there! One problem you may be having is your browser. Scott can tell you the exact release that doesn't work, but I can tell that at least IE9 works. If nothing...
View ArticleRe: Using CreoView to initiate Change request in Windchil
Hi Brad have a look to this similar topicChange Request - Annotations Table the action is hidden in the right mouse click ... not easy to find .... regards Gregory
View ArticleClik here to view.
Re: Product idea - numeric on screen keypad
Yep, that's the mouse. 12 buttons on the side. It also has a fourth button on the top for the ring finger that shifts the 12 buttons to something else while holding it down...that gives you 24...
View ArticleRe: Using CreoView to initiate Change request in Windchil
Gregory,Thanks, that was what I was missing, all good now.Thanks againBrad
View ArticleClik here to view.
Re: Sub-assemblies registering as 0 mass in top assembly?
Hi, Does the attached help? It works with assmblies with subassemblies for us. True skeleton parts should be ignored. by mechanisms. 'homemade' skeletons will need to be made part of ground or attached...
View ArticleS1000D Cover Page
Hi, I'm using AAD. Does anyone know how to use Publisher to enter the content seen in the Fig 1 Layout - Title Page of the S1000D spec? I see no obvious way of editing all these values in the Publisher...
View ArticleRe: Assembly Family Tables - Using Constraints in the Table?
To be honest I didn't even know PTC used this parameter in Wildfires. It is presented as a new enhancement in trainings for Creo Parametric, so apparently it's functionality has been enhanced in Creo...
View ArticleTitle problems in SGML
We recently upgraded from 4.2 to Arbortext 6.0. We are using our same DTD and FOSI. We had no problems with 4.2 but were losing support so we upgraded. We are having one problem with the undlining...
View ArticleSaving tree.cfg does not save the "no submodel layers" option
I am trying to set the default in the layer tree to be "No Submodel Layers". I have tried the "Save Settings File" and used the "mdl_tree_cfg_file" option to read the tree.cfg file back in during...
View ArticleRe: Hidden lines show light on PDF but not on printouts
Thanks for the simple solution. All I needed to do is go into system colors and change hidden lines to black and then PDF it out. On the screen at that point the hidden lines blended with the black...
View ArticleRe: Press fit check box
I believe that the "for press fit, ignore interpenetrations larger than:" is only for geometry that is initial interference. If the geometry is not in interference/has a gap, then this feature ignored....
View Article