Re: viewproject history using mksapi jar doesn't return all required fields
Ratheesh, Please make sure that you are using the actual field names and not the display names in your code (you can find these in the field properties in the Administration Client.)Also, ensure that...
View ArticleRe: Save a copy of part but reference orignal part
How unique are the 3 parts from each other. If you have a lot of differences, I probably would not go with family tables (and I use them frequently). If they are fairly similar with only a few...
View ArticleRe: How do I include parameters in "copy geometry"
I use INPUT & EXECUTE to pass all my parameters.
View ArticleClik here to view.
Re: Solving a Complex Equation.
O.K. You ask, Mathcad solves. Of course there is no numerical solution, because y is unknown. But symbolically it's fairly simple:Success!Luc
View ArticleCircular references and "Extrude to selected..."
(First off, I don't own the piping and cabling extension. This is pretty rare work for us, so it's isn't worth it to buy.)One model, two questions: 1. Why are there circular references in this model?...
View ArticleRe: Save a copy of part but reference orignal part
Thanks for the help everyone. I've done a little be with family tables and the parts are not that different from each other so I will probably go that route. Going to take a look at the...
View ArticleRe: How to take reference of the de-highlighted part for the activated part...
Should be how you usually do it, just takes a bit of squinting. May have to right click a larger amount of times to cycle through features.
View ArticleRe: How to take reference of the de-highlighted part for the activated part...
Oh and from time to time, when selecting surfaces, I have to rotate the assembly so that the surface is facing the "camera." For whatever reason, it won't select from the back side of some surfaces...
View ArticleRe: Filled text
In my non-current version it's under: "Insert, Model Datum, Sketch". I just did a quick test. You cannot xhatch a projected curve, and you cannot xhatch a projected cosmetic. But with the datum...
View ArticleRe: Using Area Driven Relation to Control Dimension
In your part I am unable to see the relations parameters or the the feasibility study. Any idea why this would be? I am trying to set it up formy part and I cannot seem to get it to work. Thanks
View ArticleClik here to view.
Re: Projected Reference Points in Creo Parametric 2.0
So in the case of non-perpendicular lines with a round (forgive the crude drawing), I'd need to use construction lines that are made coincident to the geometry and then put a point at their...
View ArticleClik here to view.
Re: Number of decimals for Datum points
As Clint said, it follows your environment (by default is 2 places[?]). However, the values are like all other dimensions where they are show rounded values. If you edit the feature, highlight a...
View ArticleRe: File saved yesterday. Opened today and only 5 of approximately 25 sheets...
I Didn't reinstall today, but have recently. This is the second time that this has happened to me. It happened two months ago on mu old machine. I got a new machine a month ago and installed MathCad on...
View ArticleRe: Can an href open an edit window?
Thank you for the quick response. I'll enter a case number to get an RFC created for this. Hopefully, we're not the first to request this functionality. -Sean
View ArticleRe: PTC Creo 3.0 F000 to be available in July...
What version of windchill is supported with this release?
View ArticleRe: File saved yesterday. Opened today and only 5 of approximately 25 sheets...
Yes, only 5 pages are displayed when I open your file.Autocalc is OFF, thats the reason you have to press F9 or Ctrl-F9 to get calculations done. Autocalc is a worksheet option, but autosaving is...
View ArticleRe: persistent hidden layers, assemblies and components
Hi Jim, Let us know if this is still an issue or if you resolved it. Also please mark one of the posts as "Correct Answer" if applicable. Otherwise, mark your own response as correct if you figured...
View ArticleRe: Using Area Driven Relation to Control Dimension
Why would you need more than one ? You can add more than a single parameter goal to FEAS feature, as well as more than one variable dim (though I dould not suggest having more than 2 in each...
View ArticleClik here to view.
Re: Matrix input to draw a shape
Too lazy to go that way Won't see it as our job to do so anyway. ;-)
View ArticleRe: Share Creo Customization files?
Peter, Thanks for sharing the screenshots. Wow, that is a pretty dramatic change! Where do users go if they want any features that are normally found in the other tabs?
View Article