Re: Flexible Items In Exploded Views
Antonius already mentioned the only possible (for now) way : combined views. I'll just specify what exactly should be done there to eliminate FLEX cuts or so:- for the spring part, prepare part level...
View ArticleRe: Controlling referenced sub assemblies in Top level
Vinod,You actually have an answer in your own mail: use Shrinkwrap Feature in pipinh / harness assembly to capture all required references form any required level of top assembly. Thisis exact reason...
View ArticleRe: code using nurbs in ptc creo3.0
I think the VB API does not include the ability to create geometry. You need to have access to Toolkit. If you are interested in working with NURBS then you might try Blender:...
View ArticleManufacturing UDFs: Reference group
I have created a few UDFs to assist in programming hole drilling. They combine drilling, chamfering (actually just another drilling sequence with a spot drill), and tapping sequences. Depth is set...
View ArticleRe: Open a part make with student license Creo 2.0
You cannot open native student files in the commercial version. Welcome to the forum.
View ArticleRe: gamma( ) function go with summation operator.
It seems I'm missing something ?Yes - math knowledge! Whether you are learning math or you are doing some serious work, in any case you should stick to some reliable, reputable literature...
View ArticleRe: January 2015 TC Meetings: Enhancement Requests for Creo
Hi Ben, They definitely need a better system than the one we have. No one tracks these suggestions in any sort of reasonable fashion. Some people like me maintain lists. I'm sure some of the...
View ArticleRe: January 2015 TC Meetings: Enhancement Requests for Creo
It would be better to describe it as a swept solid, an advancement over a swept profile, that is useful for motion studies. I think there is already a form of this in the motion envelope, but it isn't...
View ArticleClik here to view.
Re: gamma( ) function go with summation operator.
Hello, again. Thank you in advance. Regards.
View ArticleRe: Pin Constraint Problems
Rande, try opening the completed one in the KOP and comparing the configuration. I had some trouble with this gear box. It is rather particiular about what references you use to assemble things with....
View ArticleClik here to view.
Re: gamma( ) function go with summation operator.
I am confused!You seem to know the solution, so what is the purposeof the question?Just to see if Mathcad is capable of doing it? You saw that it is not and you have been told over and over again that...
View ArticleRe: 2015 Kit of Parts CAD files
Rande, this model comes directly from National Instruments. The best way to simplify this on your older computer is to replace it with a "box" representation. Just create an extruded box of the same...
View ArticleRe: Help with modeling hammer impact to simulate pyro-shock
Thank you Denis for the pdf. Given a proper modal anaylsis caputuring all the modal responses it seems I can get valid results with simulate. I exported the results of the normal reaction force on my...
View ArticleEin Teil verbiegen wie ?
Hallo zusammen, ich habe eine Hubschrauber entworfen, der zuerst nur aus 2D-Teilen besteht.Nun möchte ich die Seitenteile des Hubschraubers auf der Mittelachse zusammenfügen.Und das will mir einfach...
View ArticleRe: Help with modeling hammer impact to simulate pyro-shock
Ok so I see that I did not have my measure defined in simulate. So I defined a measure to measure the acceleration of my impact plate, but when trying to run the dynamic time analysis it still is...
View ArticleISODraw requires internet connectivity
While attempting to start ISODraw, an error is generated, "License request failed for feature ISODraw". This error occurs when the PC is not connected to any network. Once connected to a network,...
View Articlecli tm testcases return Missing end ')' error
Hello, I'm new in this, so I have tried to do basic things. I have tried to fetch a testcase using the tm testcase command this way:tm testcases --hostname=ims-pss-test1 --port=8102...
View ArticleWhat is corner_offset in local milling? help document doesn't explain clearly.
What is corner_offset in local milling? help document doesn't explain clearly.
View ArticleRe: Compiled Measures Data at Each Time Step
Erik,I did receive your email, but haven't had a chance to open up the model yet. I was pushed into another project at work. I will circle back to it when I get free. Thank you for your time, help,...
View ArticleClik here to view.
Re: Using match function in a loop
I'm sorry Raiko I am a little confused. In the data you provide column 3 contains values of 1 and 12, which coincide with the months of Jan and Dec, correct?Raiko's Excel files consists of two sheets....
View Article