Clik here to view.
Sweep profile around two axis with Creo Elements Direct Modelling 6.0
Dear All, please have a lokk on the following drawing: I would like add material to the driving shaft by sweeping the rectangular profile on the disk simultaneously around two axis as indicated in the...
View ArticleAssembly
I have a assembly I was copy a same assembly but when I will save as a new name every thing in ok. but than I will going go change the effect on both why? I need little change on new saved assembly...
View ArticleRe: how to develop this?
recently we had a drawing which was to be converted in solidworks, and we also needed its development.it had nothing to do with sheetmetal. so took a step file into proe..copied the surface and...
View ArticleRe: make spiral hexagon
IN R, the "%%" operator stands for Modulus, binary (takes two arguments, not a bitwise modulus) In PTC relations: mod(x,y) is the remainder function, that is x–int(x/y)*y, where int() is “integer part...
View ArticleRe: make spiral hexagon
I could have looked for eons in the PTC help and never got that much information. Thanks for that, David!
View ArticleRe: Highlighting text in Arbortext Editor 6.1 F000
Arbortext Editor has a tag to highlight text. Select Format->Touchup->Font..., which will insert a <_font> tag and display a Font dialog where you can select the highlighting, such as...
View ArticleRe: PTC Integrity - API dropsandbox
Hello Russell, I've tried to take a look at this and haven't found anything so far. Does anyone else in the community have anything to share here? Failing that, if you haven't already, you may want to...
View ArticleRe: MS Project mapping with Work Items and Change Orders?
Hello Florian, You might want to take a look at case solution CS135976: How to use the Integrity Microsoft Project Integration without ALM. This article does not directly discuss what you are doing,...
View ArticleClik here to view.
Re: make spiral hexagon
Hi Antonius... That information is available in the help files under "Functions Used in Relations". Here's a link to the page for Creo 3 containing all that information... Here's an example showing...
View ArticleClik here to view.
Re: Closing a gap - default sheetmetal bend radius opening
You are on the right track, Paul. You do want the flange, but you want to add the flange to both edges (or all 4). This will create the v-notch you are wanting. You can even add some overlap if your...
View ArticleConverting MCD files to mathcad express
Started a new job this week and installed mathcad express onto my computer this morning. My question is: how do I convert all of my old ".mcd" engineering worksheets into a format that this newer...
View ArticleRe: Probable error in function evaluation
Thanks. That's funny. Most languages produce a 'subscript of range' message and could tell what the string and subscript was so the user had an idea where to look for the problem, like: Relation...
View ArticleRe: Converting MCD files to mathcad express
JT Mayer wrote: Started a new job this week and installed mathcad express onto my computer this morning. My question is: how do I convert all of my old ".mcd" engineering worksheets into a format that...
View ArticleClik here to view.
Re: Same Stress values for different Materials????
Probably a geometry driven singularity (i.e. re-entrant corner). Stress is force/area. Given the same constraints, same force, and same geometry... both solutions can run off to infinity as the area...
View ArticleRe: Tough (but should be easy) question in Pro Mold
When you say mismatch the top, do you mean, just pull it away some?
View ArticleClik here to view.
Re: make spiral hexagon
Here is one way to capture a high resolution dataset.This was certainly more work than it should have been.Slot connection to the rescue! And with this visualization, the answer to the equation is...
View ArticleClik here to view.
Re: Assembly detailing-drawing
Thanks Clint, this is the exact solution what I am looking for. This helped me a lot to reduce duplication of my work means creating axes both in skeleton & assembly. Because I have already...
View ArticleASSIGNING START_ASM
Can any body tell that how to change start template for assembly once after creating assembly.waiting for answers. Thanaks in advanceSharath
View Article