Re: Solids, nothing more than surfaces....
tthinking more about it, is knowing about surface construction and defining 3d geometry not even relevant anymore in the future of solid modeling in this industry?
View ArticleRe: I must be doing something silly...
Forgot to attach the file and have deleted it. Anyway here is a fully numerical approach.It seems that with the values you provided at the end of your first sheet there is no solution where all three...
View ArticleRe: Problem With Geometry? VSS Driven from Datum Graph
You might review this document and its comments: Closed and Ground Spring - Alternative to Helical Sweep I ended up with a pretty good dynamic spring by using a wrapped sketch instead.
View ArticleRe: Problem With Geometry? VSS Driven from Datum Graph
And the way you keep the VSS from creating the artifacts, try making the line you sweep only half the line as geometry, and the other (center) half construction; both equal lengths. That avoids...
View ArticleRe: Cannot show custom Units on results in Mathcad Prime 3.0
When you define uH and nJ you have to label them as units to make it work in Prime, too. BTW, you know you can use Greek letters as well? Same way in Prime and Mathcad.type m and then Ctrl-G and you...
View ArticleRe: help with derivatives
i would if i could idont know how to attach my sheet and idont how to screenshot it so i can insert the image, like the first guy did in his reply.
View ArticleRe: Downloading Mathcad 15 M030
That's amazing business philosophies... Release software with a ton of bugs and a few that could cause data corruption, but you have to pay us to get the bug fixes. It's not even adding in new...
View ArticleRe: help with derivatives
Chose "Use advanced editor" at the upper right to get the option to attach files at the end of the post.To insert pics you have to click at the appropriate icon at the top row (there is one for...
View ArticleRe: Downloading Mathcad 15 M030
Welcome to the world of PTC software. As a sidenote - you also have to pay for the privilege to report bugs or to place product ideas here in this forum - you can't do any of that without being under...
View ArticleClik here to view.
Re: HOW TO CREATE MODEL OF WIRE ROPE
it starts slowing down the computer really quickly.
View ArticleRe: Linear Interpolation & Programming of Stiffness of Pile Group
I had a second look at your interpolation routines and they are definitely wrong. For instance all those routines don't consider the argument SR.ratio - it will be overwritten by the routine with a...
View ArticleClik here to view.
Re: exporting to html or other format
Ok, so there is no dinamically change or export i wanted to put it like on a webpage and then change the variables there, thank you
View ArticleClik here to view.
Re: exporting to html or other format
ibarra valenzuela wrote: Ok, so there is no dinamically change or export i wanted to put it like on a webpage and then change the variables there, thank you Unfortunately no until you talk Valery into...
View ArticleRe: sheetmetal drawing
That obnoxious little tab is usually left behind as a result of using "rip" for the end relief. Try using an Obound for the end relief of your Flat or Flange and choose a diameter large enough to cut...
View ArticleClik here to view.
Consequences of math errors
The MathCAD community may find the attached article interesting. In a largely academic setting we sometime lose sight of the fact that mathematical errors have real world consequences. The Wanapum Dam...
View ArticleRe: How to change STL faceting of flat circular surfaces
Hi Don, Old topic but, have you tried creating just a wedge and patterning it to produce the final shape? I think it would give even better control than concave/convex.
View ArticleRe: Linear Interpolation & Programming of Stiffness of Pile Group
Good Afternoon Werner, Thank you so very much for your help. I was studying you worksheet for a while. In the second worksheet, I was missing the x and y coordinates for each of the pile. Please if you...
View ArticleRe: Linear Interpolation & Programming of Stiffness of Pile Group
It seems I can't help with your second sheet as I have no background whatsoever in what you are doing there. So I just can help with the pure math or with the handling of Mathcad.
View Article