Re: rotation of the original pattren
Werner Exinger could u please tell me where i can post it so thay can help me with this problem thanks alot
View ArticleRe: rotation of the original pattren
You don't state which program you are using, so I assume its Creo.Then this wouldbe the right place: http://communities.ptc.com/community/creo?view=discussions
View ArticleRe: Error at the very beginning
Do u have a Link where i should post this? I cant find it.
View ArticleClik here to view.
Re: Error at the very beginning
Friedrich Prinz wrote: Do u have a Link where i should post this? I cant find it.Really??? I guess chosing "PTC Creo" at the top and then "Discussions" (or "All Content") and then "Start a discussion"...
View ArticleNot running creo 2.0 student edition when I click on the creo parametric 2.0...
Not running creo 2.0 student edition when I click on the creo parametric 2.0 the screen shows blank. Nothing happens i.e. no any errors or anythink message though click on creo parametric 2.0 icon on...
View ArticleShorter Hidden Line Dashes in PDF
I have a drawing with some very tiny hidden details, and when I publish it in PDF the details can't be appreciated because the gaps between the hidden line dashes and gaps are very long. How can I make...
View ArticleRemove axis system in creo illustrate
Hello everyone, I have just yet begun to use creo illustrate and for the project I'm working on, I need to export my figures to jpeg files. I find embarassing while doing this to still have the axis...
View ArticleClik here to view.
Re: Shorter Hidden Line Dashes in PDF
Scale the view to an appropriate level. However, if you have the option within your standards to make it solid but reduced line thickness, you do have that option during the PDF generation. And then...
View ArticleClik here to view.
Re: Help with PDEsolve!
Bo Bonning wrote: This is good! However, I must factor in the reactor rate relationships: Are these written correctly? Also, would I need to only specify an initial conditino for each?The last three...
View ArticleRe: Solving for multiple variables
Oh yeah - sorry, wrongful explanation. I have used this for solving in theory, but I'm trying to make a microcontroller doing it - so I need to program this in c / c++ - not mathcad. My apologies. :-)
View ArticleRe: Programming Iterative Curve Fitting
Ah, yes. The reciprocal translates to a return inverval in years for the 7-day maximum average temperature on a specific day of the year.
View ArticleClik here to view.
Absolute Drawing dimensions for Offset Csys Points
I have a model that I've created a number of points using the Offset Coordinate System Datum Point. To position the location of the points correctly some needed to have negative values in the X, Y,...
View ArticleRe: Solving for multiple variables
Benjamin Larsen wrote: Oh yeah - sorry, wrongful explanation. I have used this for solving in theory, but I'm trying to make a microcontroller doing it - so I need to program this in c / c++ - not...
View ArticleRe: Can you use a assembly parameter(or relation) in multiple parts?
Some of these parts are built in mold design, so they are tied to the assenbly anyway.
View ArticleRe: How do I save part files as .stl file in Creo Parametric Student Edition?
Carolyn, Part files are correct to export in STL format. Seems to be due to some license issue on your side. Can you upload details about your license in use?
View ArticleRe: Pressure Units
Make sure you are using lbf instead of lb. psi doesnt work for some reason. use lbf/in^2
View ArticleClik here to view.
Re: Pressure Units
Hmmm, Joseph never came back and replied after he has posed his question (which can be considered not very polite anyway) and so I don't think he will be interested more than 10 years later
View ArticleHow to save your assembly as ECAD IDF(.emn) ?
Can some one please tell me how to save an assembly as .emn?I am trying to do it and it asks me to select a bottom plane and a top plane. But it does not let me select the bottom plane that i want.
View ArticleRe: a big problem, creo2.0 can't set mapkey in 'F1'
I agree, that is bad. I have had $F1 as datums on/off since '98. Thanks PTC!Is there a way around this? Why don't they try to fix the "searching by caps" issue instead of breaking things that work?...
View Article