Re: Printing
We have a replicator 2x and Creo Parametric 2.0. Creo makes the .stl file that will go directly into the Makerware software provided by Makerbot. This is smooth and works well. I would not recommend...
View ArticleRe: Using projected and offset curves in swept blend
Pick your trajectory curve, and unless otherwise specified, your section will remain normal to that curve. Now, add your additional trajectories one at a time, starting with the next most important,...
View ArticleClik here to view.
Re: How do I define custom derivation rules for calculating error marigin in...
The simple rules result from "differentiating" the functions, as in: (except that each term on the RHS needs to be replaced by its absolute value), so they are really only valid for "small" errors...
View ArticleRe: Revit by autodesk and .bim files
I can't believe this is the most recent post about BIM or Revit.Is anybody else out there getting asked about exporting BIM models? I don't know our business use-cases, but I am still getting asked...
View ArticleRe: Creo hangs on Retrieval Window after Crash
I've got an open call on this as well. I'm able to repeat the issue so I'm hoping I'll have some success with PTC support.
View ArticleRe: How do I define custom derivation rules for calculating error marigin in...
Thanks - cheers for the explanatons!Was too much fixated on an exact calculation but I see now see the potential of those approximate error guessing. I see no practical way to automate this, though....
View ArticleClik here to view.
Re: Incorrect Flat pattern output when using flange in sheetmetal
Welcome to the forum, Graham. The "problem" is the gap definition. You have a zero gap on the side and the top and to do this right, it has to have the transition through that bend. To do what you are...
View ArticleRe: How to set state of WTDocument by code?
Hi Kaushik, Thanks for the reply.But in my case,i am trying to know the customization part(How the OIR values are been displayed in creation page).Which APi has been used to retrieve values from OIR....
View ArticleWildFire 5.0 Edu version
Hi All, I need technical help. I am shopping for a new laptop and I found two that fits my specs. One has window 8, 64 bit. Does WildFire 5.0 work with this OS?I appreciate your help!
View ArticleRe: WildFire 5.0 Edu version
Roy, Officially it only supports up to Windows 7. If it must be Wildfire 5 and not Creo 2, then I suggest you downgrade your OS to Windows 7.
View ArticleRe: How do I define custom derivation rules for calculating error marigin in...
AlanStevens wrote: Werner Exinger wrote: I see no practical way to automate this, though. No, but with a complicated function it might be less error prone to use Mathcad in this way. Yes, and here...
View ArticleAnybody here ever use eMachineShop CAD?
Hi Again Everybody, I think I have stumbled across a CAD program better suited for my skill level and my nerves. I recently got a email from eMachineShop and I have downloaded their free CAD program...
View ArticleMathcad Prime 3.0 Setup.exe does not launch
Hello, I have not been able to launch Setup.exe for Mathcad Prime 3.0 I have tried the download version F000 unsuccessfully. Then I ordered the DVD version and clicked on Setup.exe and I heard a lot...
View ArticleBasic Mathcad learning
Dear Sir, I need your valuable support.currently I am working on one project in which I have to use Mathcad programming to control parameter of assembly.I am new to this Mathcad software.I had read all...
View ArticleClik here to view.
How to emboss a text on circular surface similar to wrap by using offset?
Hi folks,How to emboss a text similar to wrap by using offset "with draft feature". Problem is here, while i am trying to put text to emboss on circular part its spreading over that part. I want to...
View ArticleRe: Publishing Engine - HOW?
This can be achieved outside of PE pretty simply using XSLT processor and the document() function. I think the issue you will have with PE is that the composition pipeline expects only one XML input....
View ArticleConvert a straight rod into flexible rod in assembly
1. A accelerator lever rod of 3mm diameter is straight in nature , but in assembly i wanted it to be flexible 3D bend .Spinal Bend is tried but was not possible to do a 3D bend.
View ArticleRe: License error
I agree. -I have 3 machines.- I had borrowed one license for 3 days on one of the machines. Now, the 3 days are over. - I am not able to use that license now. - I checked the "ptcstatus" , in that it...
View ArticleRe: Creo universal code not working
Not sure how what you are talking about has to do with the universal code not working.
View Article