Clik here to view.
Re: What is the meaning of _c1 ?
Oh, I'm so sorry about wrong syntax . Now, I got it . Many, many, many thanks, Werner. Best Regards.
View ArticleRe: Assembly Center of Gravity and Weight
Analysis, Mass Properties. The process is the same for parts and assemblies. To get a proper weight, you must assign the proper material file to your components or enter a proper value for the...
View ArticleRe: EPM link
Walter, you project is filled with Windchill Parts, the Gear icon. Are you doing something special to create them? The default configuration of Windchill has them turned off. I'm assuming the CAD Part...
View ArticleRe: EPM link
I moved the CAD model into the root folder of your project so it is co-located with the Windchill Part. I did not remove either. I'm sure if you collected the Windchill Parts as part of the removal...
View ArticleRe: EPM link
Yes, we're trying to use WTParts as part of the top-down design effort on the bot. The one in question was created on checkin of CAD objects, but there are also WTParts that were created directly in...
View ArticleRe: Can't route an the overall cable diameter, but conductors route
The complete cable doesn't route. Only the conductors route the full length. The overall cable "c4" does not route.
View ArticleClik here to view.
Re: how to undefine a mathcad 15 built in?
Using mathcad 15, how to undefine the built in "L" and "ton"?I want my formula's wich are using L and ton to indicate an error when if variables are incorrectly used. This will help me to improve the...
View ArticleRe: VB API Creo 3.0
Hello, David Schenken, thank you very much for your response. I can only with the help of VBUG.pdf and APIWizard beginn to lernen. But it is not easy. Are you experienced in this area? Could you give...
View ArticleClik here to view.
GD&T Tag in part used in as a inheritance feature wont hide in Drawing.
Ok experts I have a use that made a sheet metal cutout as a part so that we can use it as an inheritance feature so if changes are made we only have to update the cutout once. that part all works...
View ArticleRe: Setting an absolute retract height
Operation retract geometry (not necessarily a datum plane) is used to traverse between sequences, but it does not work as an overall limit to what happes within sequences. So sequences can exceed it....
View ArticleRe: Error MKS124066: Field "Properties" does not exist.
Hi Nolin, This sounds like it could be a saved preference after someone deleted or renamed the Properties field. Check out Article 90728 for details about a possible cause for this and a workaround you...
View ArticleRe: Thickness Creo 3.0
Model it from the side view and extrude the width, building your thickness into the sketch. This works nice if it is a straight taper. You can model a rectangle and apply a taper to the surface. You...
View ArticleRe: Impoerting PDF to Drawing Sheet-Resolution issue
Hello Naveen, did the thread referenced by David leave any questions/issues open?If not so, please mark his answer as correct - this helps categorizing the threads better (and gives credit to those...
View ArticleRe: Error MKS124066: Field "Properties" does not exist.
Do you mean a field literally named "Properties"? I've never had a field with that name. Could this be somehow related to a type property?
View ArticleRe: Can't route an the overall cable diameter, but conductors route
Ray,I believe by looking at your membermap and your descriped problem you have created an overbraid. Cable is looking for you to put a sheathing over everything. Instead of defining the cable shape...
View ArticleCreating new subprojects during propagation
How can I automate the steps to create a new subproject when propagating a change package for future branches ?
View ArticleRe: Old english units of money
I don't know if I should laugh or cry... Do everyone knows it's a prank, or are there some people who actually think it's a real unit and use it ?
View ArticleRe: Assembly Center of Gravity and Weight
I've been working with Lexi on this and all the densities in Creo look correct for each of the materials (using the "configure for schools" standards). So even with the right densities, things seem...
View ArticleRe: Parametric.exe will not run
I compared both folders and almost every file was different. I replaced my folder for his (and saved a copy) and the problem remains. It seems it has no solution. I'll just keep on using the bat file...
View ArticleRe: Thickness Creo 3.0
Muhammad, please see your other thread regarding this question. Your reply is unrelated to the question from the person making this thread. How i can create two different views in same drawing in Creo...
View Article