Re: how to downloade creo 1.0
Hi Joel, Please find it here (note: after registering, you will have the option to download PTC Creo 3.0 PTC Creo 2.0, or PTC Creo...
View ArticleClik here to view.
Re: Creo 2.0 RESTARTING my computer once I open a file!
Welcome to the forum, Jared. Creo is very dependent on the graphics driver and as such, it could well be that activating the second screen may have changed something. However, rebooting is not one of...
View ArticleRe: Creo 2.0 RESTARTING my computer once I open a file!
Thank You, *** "You could try changing the driver setting to "graphics win32_gdi" in config,.pro to see if this helps." *** How would I go about doing this? - Jared Sand
View ArticleRe: Creo 2.0 RESTARTING my computer once I open a file!
It depends on how your system is currently reading the configuration file.If you created a config.pro file and it resides in a custom location, you can edit this file with a text editor. You would add...
View ArticleRe: I want to combine different 2 vecctors
Unfortunately, I'm Mathcadless at the moment, but if you look in the worksheet I've attached to this message http://communities.ptc.com/message/266834#266834 I hope you will find the functions set...
View ArticleClik here to view.
Re: Setting an absolute retract height
The problem im having is that when you have a sequence retract plane at an angle of say 45 degrees, it will go above the operation retract plane at some points. Eg: I just want to know if theres a...
View ArticleClik here to view.
Prime Factorize.
Hello Everyone, Now I need help with creating a function with the output like as the following ( or a similar ) : Thanks in advance for your time and help. Regards.
View ArticleRe: genfit / guess values
See the attached worksheet. Your fitted function is the sum of three sinusoids, each with an amplitude and a frequency (but no phase terms in any of them). If you know those amplitudes and frequencies...
View ArticleClik here to view.
Could you give me a method to restrick vector's values?
I want "omega" to restrict 12.1rpm. So I tried such as a upper picture.But I got error. I can't understand why I got error.could you help me?
View ArticleClik here to view.
Re: Could you give me a method to restrick vector's values?
You may use a small auxiliary function whch you then call vectorized:
View ArticleRe: Could you give me a method to restrick vector's values?
Oh Thank you very much. But I wonder why I got error when I tried
View ArticleClik here to view.
Re: Could you give me a method to restrick vector's values?
You can't compare a vector to a scalar. In fact - you can, but the result will be a vector consisting of zeros and ones which is invalid as condition in the if function.
View ArticleClik here to view.
Re: Could you give me a method to restrick vector's values?
But It is ok.I can't understand why
View ArticleRe: invalid parameter for host id for trial version use
You will need to contact PTC directly so they can manually assign a trial license key.
View ArticleCrash on adding part to assembly
I'm using PTC Creo Parametric 3.0 M010 (The trial verision) and I've been going through the tutorials, but everytime I try to add a part to an assembly the program does a full crash with no...
View ArticleRe: Adding Constraints to Sketches in Detail Drawings
It is a common requirement and sketching sure does leave a lot to be desired. Sketching on a drawing should be similar to sketching in a section/sketch of the model, but that is not how it is. I...
View ArticleRe: Can a Workflow task contain an option to "delegate" the task to another...
The Customizer's Guide provides some example code for setting the object instance team based on Task completion. The example shown illustrates a "rework" task that is assigned to the user that...
View ArticleUnlock a parameter
I am trying to find out how to unlock a parameter in creo 2.0 that is locked by Intralink or similar
View Article