Clik here to view.
Re: Creo 2.0 Mapkey for Iso view
Well, it would save me a few more mapkeys to remember as I'd like to set this for 4 different ISO views.Also I would then have all my "views" mapkeys on the numpad.Last, I like to learn new things...
View ArticleClik here to view.
Re: is it possible to integrate "vector"?
i guess that your mathod isn't support "prime 3.0".... I attached my "xps" file because you can't open my file.may be, it is messy because I can't arrange.when you open it, you can some equation. it...
View ArticleHow to delete a system file
Hi All, I just had a problem deleting system files. Every time I tried to delete a file it told me it was open (see the attachment DeleteFile.png). Closing the project didn't work either then you get...
View ArticleRe: Configuration Options
Okay, I suppose I'm looking for help with both of them. I do undertand there are loads of settings that can be configured and its daunting looking at the list of them and knowing what to do. For...
View ArticleExploded Views in Drawings
Hello All I am trying to make an exploded view drawing. While I am creating my assembly I put axis in each of the cylindrical parts to make them easy to mate and make my exploded view lines....
View ArticleRe: Creo 2.0 Mapkey for Iso view
With some imagination, you can do that: Create the view first.Start recording the mapkeyTry to create the view again, with your standard anglesSave the viewA dialog message asking if you want to...
View ArticleRe: dimension witness line gap on drawings
Good point about the chosen lines affecting how the dimension acts. In my case, I have selected the two vertical lines in both cases (shown sketch dimension and created dimension). It appears that...
View ArticleHow do you set spin center or change the axis the part is on?
Hello, I am trying to create an animation. When I select one part I can move it on the right axis. When more than one part is selected to move as a group, the axis changes. Can you change the spin...
View ArticleRe: dimension witness line gap on drawings
Thanks David. This is good to know. I didn't know about this config setting but, now that I do, I still don't know why a setting that eliminates overlapping lines (to create clean plots and save ink)...
View ArticleRe: How do I get Setup Participants in PDMLink 10 to act like it did in 9.
Joe, I spoke with the TSE on this case. See the attached video for an example of how to utilize the Keir's and the product manager's suggestion.
View ArticleCan't type code into Simple License Entry Creo 3.0
Hi I'm a student that's trying to install the Student Edition of Creo 3.0, but when I get to the part in installation process where I'm supposed to type in the product license, it won't let me type it...
View ArticleRe: Updating Readexcel data
Doesn't a recalculation of the Prime worksheet (Ctrl-F9) do the trick? In contrary to Mathcad a sheet is not recalculated when you open a worksheet but just shows the results of the last recalculation...
View ArticleRe: Office 32bit with DTI 64 bit Issue
Just an update. We thought we had it fixed but alas no. We have found that Windows Explorer crashes when accessing documents on a mapped or network drive. Tomorrow I will be actively testing DTI...
View ArticleRe: Hole tool - clearance hole standards
I think this is one of those cases where the tools are given for you to implement to your desired standards. I don't trust anything PTC provides without vetting it for myself.
View ArticleClik here to view.
Re: User Control Access
Recommend in Windchill you create ACLs by Role or Group, not by User. If you have multiple organizations in your Windchill system, suggest you create ACL at the organization level. Do you want the ACL...
View ArticleClik here to view.
Need to display tangent lines in Modeling instead of Annotation
I'm using Creo Elements/Direct Modeling 19.0 and need to create an exploded view of an assembly with Perspective turned on. As I don't believe there is a way to do this in Annotation I have to do it in...
View ArticleRe: Windchill Implementation
If you are not going to use PDMLink Change Management to manage your CAD Models and Documents, agree fully with Ben, look into using IntraLink. Also PDMLink 10.1 M050 is the 1st version of 10.1 that...
View ArticleRe: CAD Worker as a VM?
I also found that it helps to give each worker it's own upload folder. Before I did this different workers would sometimes try to create folders with the same name. Obviously one of them would fail...
View ArticleCreo 3 Hole feature
Hi, I'm no longer using cuted threads, I'm rolling my threads now.The values, by default, for the hole feature is for cutted threads, for rolled ones the drill diameter must be bigger.My question is,...
View ArticleClik here to view.
Basic mechanism question
Ok, trying to learn something about mechanisms.. I have two bodies and a ground. here is a simplified image: I need that body 1 and 2 slide away from ground: Then I need body 2 to come in reverse...
View Article