Clik here to view.
Re: Select data in a matrix
Submatrix is useful but you have to distinguish three cases (first, last or middle row/column) which makes it a bit unhandy to program. Using a simple loop might look bold but does the job pretty...
View ArticleClik here to view.
Re: How to convert audio file to prn file
Thank you, Stuart. READWAV and WRITEWAV do exactly what I needed:
View ArticleClik here to view.
Re: MathCad help
Salim Ahmed wrote: This is the orignal polynomial h(x)=x4-x3-19x2-11x+30, because h(x)=6 I minused 6 from 30 which left me with 24. So now I am confused?So am I because I don't understand why you are...
View ArticleRe: MathCad help
Ok so I have to solve it two different ways other than graphical, so lets say my method is method 1, so method 1 was solved to four decimal places, and if I formatted Mikes to four decimal places thats...
View ArticleClik here to view.
Re: Many rounds on a LARGE part
I see Thanks for clarifying read-only. Forgive me but I want to make sure you understand the issue. My model regeneration time before rounds was bad, but I'd say on par with normal parts modeled with...
View ArticleRe: Minimize & Maximize in Mathcad 15 and Prime 3
Valery Ochkov wrote: Sorry,I have used in Prime 3 others wspDPT function without strings as an error mesage.Are you saying that the wspDPT function for Prime was different from the one for MC15?
View ArticleRe: Solving equation using find funtion- mathcad
Hi, I tried to look for undefined variable and simplified my mathcad sheet and it worked. Thank you.
View ArticleRe: Solving equation using find funtion- mathcad
Vani Peri wrote: Hi, I tried to look for undefined variable and simplified my mathcad sheet and it worked. Thank you.Please in future post worksheet as this thread has become useless to others unless...
View ArticleClik here to view.
Re: Newton Raphson Method Help
Mike Armstrong wrote: The symbolic processor finds three solutions.Not if you enter 14+742/1000 instead of 14*742/1000 OK it will still find three solutions but only one of them would be real. The...
View ArticleClik here to view.
Clik here to view.
Re: Newton Raphson Method Help
Werner Exinger wrote: Mike Armstrong wrote: The symbolic processor finds three solutions.Not if you enter 14+742/1000 instead of 14*742/1000 OK it will still find three solutions but only one of them...
View ArticleRe: parameter constraints with genfit?
Genfit only uses the derivatives with respect to the fitted parameters. I looked up the algorithm for the Levenberg-Marquardt method for non-linearized fitting.
View ArticleClik here to view.
Re: simplifying expression
It is possible, if you tell Mathcad what you want it to give you. With:
View ArticleClik here to view.
Re: Animating beyond 999 frames
Here is the missing picture which Jean had attached back in 2004.Not sure if it would help, though.I am not aware of any trick to get more than 1000 FRAMES but if you have luck, pleasae post it here.
View ArticleRe: Many rounds on a LARGE part
Thanks... Everything before it gets a read only flag too.
View ArticleRe: Mechanism Analysis Definition,
mechanism accuracy lack some desired precision. In a support case I once files, it is only accurate to single precision. Of particular issue are ratios that don't come out to a nice round number such...
View ArticleIsoDraw 7.3 m30 can you set opacity on a ai file that is placed
I have an ai file that I have placed onto an IsoDraw template. I have ungrouped it so I can select the objects. Is there a way to change the opactiy of one of the objects? Bryon
View ArticleRe: solidify
Solids and quilts behave quite different in Creo. To get a set of surfaces to solidify, you need a closed boundary and merges surfaces into one quilt. A solid may also share the quilt boundary to...
View Article