Clik here to view.
Re: Large Deformation FEA
So here's a quick revised model. I've elimated the top weldment, used a mapped mesh, used the linear-hardening elastoplastic material model, and adjusted the constraints; the whole model took a little...
View ArticleRe: Creo 2.0 Issue with Microsoft Surface Pro 2
Deleted the "graphics" option and adding the "enable_opengl_fbo no" did not work for me. Same result reboots when loading a part. Deleted both = same reboot result. Went back and added "graphics d3d"...
View ArticleRe: mapkey to fix all the views
works well thanks,any chance you have one for doing iso views?
View ArticleReferencing worksheets
Hello all, I am pretty new to Mathcad and still in learning stage. I have two seperate mathcad files created by different people. I need to cross refer variables from one file to another. I tried to...
View ArticleClik here to view.
Re: Machining a groove in a cylindrical part
Of course, I say all this and try it afterward and things are different. The sharp corners are undercut as you go deeper into the part. You have to decide where you want the sharp to be. You can...
View ArticleClik here to view.
Detail View in Drawing
Our drawings have as a standard drawing view boundary type set to "circle". See below. Our old drawings are like below. Does anyone know how we can make the circle display like this in phantom line...
View ArticleRe: Referencing worksheets
Deepak Somasundaram wrote: Hello all, I am pretty new to Mathcad and still in learning stage. I have two seperate mathcad files created by different people. I need to cross refer variables from one...
View ArticleRe: Referencing worksheets
Deepak Somasundaram wrote: Hello all, But since the files where created by different people, there are few common variable names in these two files so they are overwritten. Is there an option in...
View ArticleRe: Mathcad 15 M030 can't draw multiple 3D plot?
As Prime did when I converted the file?
View ArticleRe: Referencing worksheets
One possibility is to add some new variables in between the References to store the values that have duplicate names. Another possibility, if there are only a few variables, is to write the data to...
View ArticleRe: Machining a groove in a cylindrical part
Hi Antonius, Yes, not the machinist, but the jeweler! this is only about 1/4" - 3/8" in diameter! The part will probabaly be cast once teh design is finalized. yes, good point on teh undercut....
View ArticleClik here to view.
Re: Machining a groove in a cylindrical part
Well...it's probably easier to draw than to fabricate.
View ArticleRe: Machining a groove in a cylindrical part
A v-cut would make things easier but it still has artifacts of it's own. This document will probably make it easier to use the wrap tool... apply the information to your wrap feature...Closed and...
View ArticleRe: sheet metal mitered corner
Thanks Magnus, Am just tryign this, but I've noticed that Creo craps out when the angles aren't 90°. In my particular case, this methods works until the 3rd edge. it's not 90° to its neighbor, more...
View ArticleRe: Simple Balloon Placement?
I don't know of a way to do it the way you want, other than Antonius's way. This would be a good product idea!!!
View ArticleClik here to view.
Re: Failed Components in Model Tree
Steven -When I RMB on one of the failed parts and do open the below is what I see in a new graphics window. They are in my actice workspace. I hope you can read the image.
View ArticleClik here to view.
Re: Hide cosmetics in drw
Suppression of unnecessary threads in viewselect the ribbon Annotateselection filter must be on General ( in right-down corner )choose the thread in viewright mouse button – Erase To resume the thread...
View ArticleClik here to view.
Re: Failed Components in Model Tree
Steven -Sorry. I went back into the original drawing that I posted the attachment of and RMB'd on the highlighted part, 43785 and this is what I see.
View ArticleRe: Dimensioning A VSP File in Parametric?
Thanks for the reply. When I click on the "About Annotation" link it brings me to a log in page. After logging in it tells me my account isn't authorized... Any suggestions? When I try to upgrade my...
View ArticleRe: Dimensioning A VSP File in Parametric?
Sorry, I answer a lot of customer issues also. You can find the same topics in your local Creo Help Center installation.
View Article