Re: Prime Problems: Document Interaction
I'm interested in PTC and user advice more recently - say, since Prime 2. Have there been any usability labs in that time? Has anyone in this forum been able to communicate bug reports, problems or...
View ArticleClik here to view.
How to solve this PDE ?
Does the information given by the system mean that mathcad cannot handle this kind of parabolic equation?
View ArticleRe: Twist in blend
Also make sure the section you want to change the start point on is selected.
View ArticleClik here to view.
Re: How can I distance a circle from the surface I am putting it on?
I take it back, with all the diameter changes, I would just revolve that whole profile.
View ArticleRe: How can I distance a circle from the surface I am putting it on?
That´s a little confusing Andrew... If you´re using the revolve feature (in your previous image) it seems you´re choosing the wrong plane. For a part like that, I would use a single revolve feature to...
View ArticleRe: I don't know the reason error is generated
Thank you for advice.But I am sorry because I don't understand well.So, Could you explain easily?
View ArticleRe: I don't know the reason error is generated
jinsuk Lee wrote: Thank you for advice.But I am sorry because I don't understand well.So, Could you explain easily? Not sure how and what exactly. 1) I don't see the "division by zero error" you are...
View ArticleClik here to view.
Re: Modelling a suction cup
Steve,Is this what you are after? The offset of DTM1 controls the 'squash' of the cup shown below as a section.Model attached.
View ArticleRe: How can I distance a circle from the surface I am putting it on?
I tried using these in my copy of Creo Parametric 2.0, but due to a glitch, this glitch http://communities.ptc.com/thread/56970 So I need to get that fixed first, because these were created in a...
View ArticleRe: Modelling a suction cup
Even a one-piece item has complex internal stresses and deflections that are not accurately represented by a geometry solution, particularly if the supporting surface for applying loads to the suction...
View ArticleRe: How can I distance a circle from the surface I am putting it on?
I think you will find what you wanted orginally in the Blend feature. This allows you to define offsets between sketches. You can use taper in extrude but it only takes angle references. You would...
View ArticleRe: User need help with Simulation setup.
Hi DenisThe Aluminum part (first part in assembly - as shown in model tree) = millimeters Kilograms Second (mmKs)The Polypropylene part (second part in assembly - as shown in model tree) = millimeters...
View ArticleRe: Sheets
Hello Edna, I suspect this question belongs in the Community for one of our CAD products. Which project are you using? Regards,Kael
View ArticleRe-publish ideas needed
There doesn’t appear to be an out-of-the-box way to force everything to republish. Due to changes in our publish rules (additional files) and the creation of a publish filter (for extended positioning...
View ArticleRe: User need help with Simulation setup.
David, If you're on maintenance with PTC, then I would upgrade to Creo Simulate 3.0, which has LDA (large deformation analysis) with contact.
View ArticleRe: Enhancements to Revise Part and CAD Documents - 1. Revise Part Only
Jennifer,This is quite a complex posting. After reading through, I like where it is going. Your proposal is if a certain version of a CAD file is associated to multiple versions of WTPart, then only...
View ArticleRe: Axis lines in .drw format
Hello Kaci. There is no simple way but generally this is done in the model by creating a datum axis. You could do this with a sketch by defining a geometry axes, but sketches tend to hide if you do...
View ArticleRe: Text in CGM not searchable in created PDF
What was the old Arbortext version you were using? From memory, in Arbortext 6.0 they changed from Larson CGM engine to the ISODRAW (IsoView) engine for CGM. This may account for the difference in CGM...
View Article