Re: Counting the numbers of perimeters using J-link

I understood and made J-link work.

I started working on the perimeter counting. For solid parts, it worked perfectly, but for sheetmetal parts, it’s not getting as I expected.

We use lots of sheetmetal, nearly 90%. I thought to do this way:

1)          To create the Flat Pattern;

2)          To create a Section Planar;

3)          To create a Curve from Cross Section;

After that, I would count through the Curve. I tried all sorts of ways but didn’t succeed.

Is there anyone who could help?

Thank you!